GIGABYTE Z890M FORCE DUO X WIFI7 (Socket LGA1851, Z890, DDR5, Type C)

Silakan konfirmasi stock sebelum melakukan pembelian 🙂

Specification :

Prosesor : LGA1851 socket: Support for Intel Core Ultra Processors

Chipset : Intel Z890 Express Chipset

Memori :

Support up to 9733+MT/s (OC)

CQDIMM Support up to 8000 MT/s (OC)

2 x DDR5 CQDIMM sockets supporting up to 256 GB (64 GB/128 GB single DIMM capacity) of system memory

Dual channel memory architecture

Support for ECC Quad‑Rank Un-buffered DIMM memory modules (operate in non-ECC mode)

Support for non-ECC Quad‑Rank Un-buffered DIMM memory modules

Support for Extreme Memory Profile (XMP) memory modules

Kartu Grafis Terintegrasi :

Integrated Graphics Processor-Intel HD Graphics support:

– 1 x USB4 USB Type-C port, supporting USB4 and DisplayPort video outputs and a maximum resolution of 4096×2304@144 Hz

Support for DisplayPort 2.1 version and HDCP 2.3.

– 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz

* Support for DisplayPort 2.1 version and HDCP 2.3.

Audio :

Realtek Audio CODEC

High Definition Audio 2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN : Realtek 5GbE LAN chip (5 Gbps/2.5 Gbps/1 Gbps/100 Mbps)

Wireless Communication module :

Realtek Wi-Fi 7 RTL8922AE (PCB rev. 1.0)

– 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands

– BLUETOOTH 5.4

– Support for 11be 160MHz wireless standard

MediaTek Wi-Fi 7 MT7925 (PCB rev. 1.1)

– 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands

– BLUETOOTH 5.4

– Support for 11be 160MHz wireless standard

Slot Tambahan :

CPU:

– 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)

* The PCIEX16 slot can only support a graphics card or an NVMe SSD. If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot.

Chipset:

– 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4)

Antarmuka Penyimpanan :

CPU:

– 1 x M.2 connector (Socket 3, M key, type 2580/2280 PCIe 5.0 x4/x2 SSD support) (M2A_CPU)

– 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2B_CPU)

Chipset:

– 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)

– 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2M_SB)

– 4 x SATA 6Gb/s connectors

RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices

RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

USB :

CPU:

– 1 x USB4 USB Type-C port on the back panel

Chipset:

– 1 x USB Type-C port with USB 3.2 Gen 2 support, available through the internal USB header

– 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel

– 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

Chipset+2 USB 2.0 Hubs:

– 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

Konektor I/O Internal :

1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connectors

1 x CPU fan header

1 x CPU fan/water cooling pump header

3 x system fan headers

1 x system fan/water cooling pump header

3 x addressable RGB Gen2 LED strip headers

1 x RGB LED strip header

5 x M.2 Socket 3 connectors

4 x SATA 6Gb/s connectors

1 x front panel header

1 x front panel audio header

1 x USB Type-C header, with USB 3.2 Gen 2 support

1 x USB 3.2 Gen 1 header

2 x USB 2.0/1.1 headers

2 x Thunderbolt add-in card connectors (For GIGABYTE Thunderbolt 5 add-in card only)

1 x Trusted Platform Module header (For the GC-TPM2.0 SPI V2 module only)

1 x reset jumper

Konektor Panel Belakang :

1 x reset button

1 x power button

1 x Clear CMOS button

1 x Q-Flash Plus button

4 x USB 3.2 Gen 1 ports

1 x DisplayPort*

1 x USB4 USB Type-C port (DisplayPort*)

4 x USB 2.0/1.1 ports

1 x RJ-45 port

1 x USB 3.2 Gen 2 Type-A port (red)

2 x antenna connectors (2T2R)

2 x audio jacks

1 x optical S/PDIF Out connector