Silakan Komfirmasi Persediaan Stok Barang Sebelum Melakukan pembelian Trimaksih.

Addressable RGB for Full Colour Control:
The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.

0dB Mode – Zero RPM:
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

Maximum Smoothness, Minimum Vibration:
The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P14 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.

Optimised for High Static Pressure:
The P14 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.

General data Performance:
Fan Speed: 200 – 1900 rpm PWM controlled (0 rpm below 5% PWM)
Airflow: 68.9 CFM/ 117.06 m /h
Static Pressure: 2 mm H O
Noise Level: 0.3 Sone

Fan:
Fan Frame: Standard
Control Type: PWM PST
Connector: 4-Pin-Connector + 4-Pin-Socket
Fan Bearing: Fluid Dynamic Bearing
Operating Ambient Temperature: 0 – 40 C

Electric Characteristics:
Typical Voltage: 12 V DC
Starting Voltage: 5 V
Current/ Voltage: 0.17 A / 12 V
Cable Length: 400 mm

RGB Specifications:
LEDs: 12 A-RGB LEDs
Connector: 3-Pin 5V-DI-GND Connector
Current / Voltage: 0.4 A/5 V
Cable: 450 mm cable with 80 mm sharing cable,